Did you know that a great deal of money in energy costs gets lost through air leaks in ducts every year? It gets calculated that an incorrectly sealed duct may raise your heating bill by about 30%. Unfortunately, price isn’t the only outcome of an ineffective duct system.
The warm air that escapes can make your house uncomfortable and colder. It will also force your unit to work more and may lead to wear and tear on the part of the machine. The continuous motion of the blower motors also lowers the air quality in the home.
When you have leaks in your duct system, you must get them repaired and sealed immediately. Aeroseal duct sealing is the better solution to counter this issue.
So keep reading as we discuss Aeroseal duct sealing and everything you need to know.
What Is Aeroseal Duct Sealing?
Aeroseal is a new duct sealing technology that guarantees your ducts are airtight. As a result, it enhances the efficiency of your HVAC system.
It gets formed from polymers that properly and effectively seal any cracks, gaps, or leaks in your ductwork. This approach goes beyond reaching hard spots and sealing leaks that may not be evident. Companies using Aeroseal believe it’s superior to the inaccessible leaky duct.
Aeroseal plugs the ducts from the inside; we don’t need access to the vent to seal it. Examples of houses with inaccessible ductwork are on a metal trunk system, flat roofs, or a 1st-floor duct system on a two-story house.
The Process of Aeroseal Duct Sealing
In Aeroseal duct sealing, technicians will first block any open registers, vents, and grilles in your house. This method allows easy and fast identification of leaks in your home’s duct system. In other cases, the contractor may examine the extent of ductwork leakage to compare before and after.
The technician will use computer software to detect any leak’s location. Even if the Aeroseal sealant can block the holes, your technician will not waste any. Instead, they’ll use computer technology to determine the amount of adhesive needed.
Then the Aeroseal machine gets hooked to your duct system close to the furnace, which gets sealed too. In this way, it will protect any vital HVAC equipment and components. Then, the Aeroseal device will blow an atomized polymer into the duct system for an hour.
Continuous air activity will ensure that all the small aerosol particles stay hovered in the air. The device uses artificial particles, which get created and merged to plug air from escaping. These particles will attach to any opening from which pressurized air may escape and begin making a seal.
After the bond gets injected, the contractor will do a leakage analysis, assuring that Aeroseal has plugged the leaks. If there are still leaks, they can repeat the Aeroseal process until totally sealed. Despite Aeroseal’s ten-year warranty, many homeowners have stated that it lasts far longer.
Due to the polymers that create the leak sealant, they stay flexible for years rather than becoming flaky. To know more about how Aeroseal duct sealing works, call a skilled Aeroseal technician.
Aerosol Duct Sealing Test Under Pressure
Part of the Aeroseal method can be like conducting a blower door test on a house. You’ll know this test if you’ve done an energy audit. To find leakage and find and measure air, our energy auditors use a blower door as a diagnostic device to put the house under pressure.
Through Aerosealing, we isolate the duct system and put it under a positive pressure test. So we can feel and hear where the leaks are in the ductwork while putting it under pressure.
Why Use Aeroseal in Your Ductworks?
You can rely on synthetic nanoparticles that mix to seal any small leaks in your duct system. For example, Aeroseal can create your ducts very secure ductwork by binding to any cracks, holes, or other defects. Aeroseal bond has many of the same components found in chewing gum and glue.
Some of the benefits of Aeroseal duct sealing include the following:
- Allowing your home to achieve consistent temperature fast and efficiently
- Lowering your power consumption by stopping leaks
- Improving the air quality by blocking pollutants
- Prolonging the lifespan of your HVAC system
- Eradicating mildewed smells, excessive accumulation of dander and dust, and too-high humidity
Duct leaks can make some rooms feel too hot, and others feel too cold. Aeroseal sealant can fix these leaks more efficiently. Moreover, it has a mild smell that will disperse within hours after installation.
Is Aeroseal Duct Sealing Safe?
Due to the Aeroseal formula being water-based, it’s entirely non-toxic. It’s used in very tiny amounts to seal the minute cracks and tears in the ductwork. It means there’s never very much of it, and it will remain rubbery.
It won’t begin to dry or flake off and enter your air supply as other sealants do. Furthermore, the material won’t cover the inside of your duct system. It only seals the leaks, so Aeroseal is very safe compared to some forms of sealing ducts.
How to Get Aeroseal Duct Sealing Done
Firstly, look for an HVAC specialist trained in conducting Aeroseal duct sealing. While the method is simple, it needs precision and training to perform the sealing process. In addition, finding the proper industry for the job will require research and references.
Next, discuss the effects with some satisfied clients and the Aeroseal process. You can also feel the difference instantly and see the confirmed before and after outcomes in a printed certificate. Finally, talk with the HVAC contractor, as they may ease your mind about what’s involved with fixing the ducts in your house.
Aeroseal Duct Sealing Cost
Aeroseal costs may range between $1600 – $2300 for each unit. The prices can changedepending on the accessibility of the HVAC unit. Also, the cost may differ with HVAC, type, height, the number of registers, and how much ductwork to seal.
Aeroseal Duct Sealing: Your Go-to Solution
Aeroseal locates and seals any leaks all over your whole ductwork with precision. As a result, Aeroseal provides your home with even temperatures in each room, energy savings, and healthier air. Moreover, our HVAC company is an excellent option for homeowners who need duct sealant.
Our specialists have all the proper certifications and experience to perform the task. Contact us now for your needs about Aeroseal or any other repairs for your HVAC systems.